Tyoon Logo

Electrical work – safe and to standards in Uusikaupunki

Electrical installation in Uusikaupunki is strictly regulated: any work (new circuits, rewiring, board installation) must be done by licensed specialists. Our masters ensure full compliance with SFS 6000, SFS 6002 and safety at home. Order electrical work via the platform — compare offers and profiles. Work payment is not processed through Tyoon.

Request electrical workBecome a provider for Electrical WorkBack to cityBack to services

Why Tyoon

  • Safety: certified materials and norms (RCD, earthing)
  • Quality and guarantee on installation
  • Save time: turnkey work from design to connection
  • Correct load and cable sizing

Steps

  1. 1
    Describe the task
  2. 2
    Get offers from specialists
  3. 3
    Choose and confirm

Why trust a professional electrician

Electrical work: installation and safety
  • Safety. Incorrect installation leads to short circuits and fires. A certified master knows norms (RCD etc.) and ensures protection.
  • Quality and guarantee. Professional uses certified materials and gives a guarantee. Platform allows warranty terms to be recorded.
  • Save time and money. Experienced electrician does turnkey work from design to connection.
  • Correct load calculation. Specialist measures and accounts for all loads; calculates breakers and cable cross-section to SFS.

Work stages (typical process)

Electrical installation: board and breakers
  • Inspection and diagnosis. Assess existing wiring, overload zones and outdated parts. Check wiring and earthing.
  • Design. Circuit diagram, cable routes, board location, breakers and RCDs.
  • Material selection. Cables, board, breakers, sockets, lighting (Hager, ABB, Legrand, Schneider). K-Rauta, Stark, Onninen.
  • Installation. Cables (NYM, H07RN-F), back boxes, distribution board. Connections by screw or ferrules.
  • Testing. Each circuit checked with multimeter and RCD tester.
  • Certification. Test protocols and handover certificate (sähköntoimitustodistus).

Materials and tools

  • Cables: NYM-J, H07RN-F, power cables. Breakers and RCDs. Distribution board. Sockets and switches. Earthing conductors.
  • Tools: screwdrivers, phase tester, multimeter, chaser, pliers, crimpers, level, drill.

Choosing and buying materials

You can buy materials yourself or leave to the specialist. In practice: specialist buys cables and gear; client may buy part (sockets, lights); or mixed.

Safety and standards

  • Installation must be done by a certified electrician. SFS 6000, SFS 6002, SFS 6007. PE conductor and RCD mandatory. Finnish electrical safety law requires testing and documentation.

Guarantee and handover

Agree warranty terms. After work check lights, sockets and board. Work payment is not processed through Tyoon.

Checklist before the specialist arrives

  • Ensure access to the distribution board.
  • Disconnect old appliances and move furniture.
  • Keys to board and riser.
  • Provide circuit diagram or allow on-site measurements.
  • Mark where new sockets and switches are needed.

FAQ

Does electrical work need to be approved?

A separate permit is usually not required, but work must be documented and entered in the electrical service plan. Important for insurance and property sale.

What if work is done without a licence?

Safety norms are breached; insurance may refuse cover in case of damage. Finnish rules prohibit DIY rewiring.

What is the minimum socket height?

Typically 30–50 cm from floor. Lighting points as per design, often at ceiling level.

Request electrical work